直上型前輪安裝
專為 Toyota Land Cruiser 200 / LC200 / J200 與 Lexus LX570 前軸應用設計的車型專用直上配置。
產品詳情
xDirect-Mount 系列 · 前軸 · 六活塞
2008-2021 Toyota Land Cruiser 200 / Lexus LX570 AR6 Direct-Mount 前輪大煞車套件
TTSPORT AR6 直上型系列前輪大煞車套件專為 Toyota Land Cruiser 200 / LC200 / J200 與 Lexus LX570 車型打造，滿足拖曳、載重、加大輪胎、防撞裝甲、車頂載物以及長時間下坡等情況下對前軸更強煞車性能的需求。套件搭配鍛造 6 活塞卡鉗、Ø362 mm × 32 mm 兩片式前碟盤組、不鏽鋼金屬編織油管，以及車型專用接頭，帶來紮實且可預期的踏板回饋。
為何 Toyota LC200 與 Lexus LX570 改裝車主選擇 AR6
採用分離式大樑底盤的重型 SUV，在加裝加大輪胎、鋼製保桿、抽屜櫃、車頂裝備、拖車或救援設備後，會對前軸煞車造成極大負荷。AR6 提升卡鉗剛性、活塞面積、碟盤直徑與散熱容量，同時維持直上安裝與車型專用設計。
六活塞鍛造卡鉗
兩片式鍛造鋁合金卡鉗本體，配備 30 mm × 2 / 34 mm × 2 / 38 mm × 2 隔熱活塞與防塵套。
55.0 cm² 活塞面積
每個卡鉗總活塞面積達 55.0 cm²，有助於在更重的前軸煞車負載下提供可控的夾持力。
兩片式碟盤組
Ø362 mm × 32 mm 內通風前碟盤組，採固定式安裝、方向性設計與弧形溝槽盤面。
102 mm 輪輻間隙
AR6 需搭配 17 吋或更大輪圈，且輪輻與前卡鉗之間需至少保留 102 mm 間隙。
不鏽鋼金屬煞車油管
PTFE 內層、SUS304 不鏽鋼編織層與 PVC 保護外鞘，有助於降低煞車負載下的油管膨脹。
AR6 直裝式技術規格與套件選項
| 煞車卡鉗 | |
|---|---|
| 系列 | 直裝式系列 |
| 型號 / 適用車型 | AR6 |
| 安裝軸位 | 前輪 |
| 活塞數量 | 6 活塞 |
| 活塞類型 | 兩片式隔熱活塞，附防塵套 |
| 活塞直徑 | 30 mm × 2 / 34 mm × 2 / 38 mm × 2 |
| 卡鉗尺寸 | 長 330 mm × 寬 167 mm × 高 128 mm |
| 活塞總面積 | 每卡鉗 55.0 cm²（所有活塞合計） |
| 製造製程 | 兩片式鍛造鋁合金本體 |
| 淨重 | 每卡鉗 4.45 kg（不含來令片） |
| 表面處理 | 高溫亮面塗層 |
| 建議輪圈尺寸 | 17 吋或以上 |
| 建議碟盤尺寸 | Ø362 mm × 32 mm |
| 煞車碟盤 | |
| 碟盤材質 | 熱處理高碳鑄鐵 |
| 安裝軸位 | 前輪 |
| 本車型適用碟盤尺寸 | Ø362 mm × 32 mm |
| 結構 | 兩片式碟盤組 |
| 通風設計 | 內通風式 |
| 碟盤固定方式 | 固定式 |
| 方向性設計 | 有 — 左右專用 |
| 碟盤表面紋路 | 弧形溝槽 |
| 煞車來令片 | |
| 相容碟盤材質 | 僅適用鑄鐵／鋼製碟盤 |
| 工作溫度範圍 | 0–600 °C |
| 平均摩擦係數 | 平均摩擦係數 μ：0.38；變動取決於溫度、管路壓力與碟盤狀態 |
| 煞車油管 | |
| 煞車油管結構 | 三層強化結構 |
| 煞車油管材質 | PTFE 內層 / SUS304 不鏽鋼編織層 / PVC 保護外鞘 |
| 煞車油管接頭 | 車型專用接頭；卡鉗端與車身端接頭依車型而異 |
| 車型適用與碟盤對應 | |
| 2008-2021 Toyota Land Cruiser 200 / LC200 / J200 | 前輪 · Ø362 mm × 32 mm |
| 2008-2021 Lexus LX570 | 前輪 · Ø362 mm × 32 mm |
| 車型適配 & 安裝 | |
| 主要適用車型 | 2008-2021 Toyota Land Cruiser 200 / LC200 / J200 · 2008-2021 Lexus LX570 |
| 車型年份 | Toyota LC200：2008-2021 · Lexus LX570：2008-2021 |
| 軸別 | 前輪 |
| 卡鉗安裝型式 | 直裝式 |
| 最小輪圈尺寸 | 17 吋或以上 |
| 最小輪輻間隙 | 102 mm |
| 煞車油管接頭型式 | 車型專用接頭；卡鉗端與車身端接頭依車型而異 |
| 訂購確認 | 訂購前請確認年份、車型等級、前煞車硬體、輪圈直徑、輪輻間隙，以及煞車油管接頭樣式 |
| 磨合（開皮）程序 | 必要 |
針對 Toyota LC200 與 Lexus LX570，AR6 前碟盤的正確規格為 Ø362 mm × 32 mm，並採用兩件式碟盤總成。訂購前請確認輪圈為 17 吋或更大、輪輻間隙至少 102 mm，以及煞車油管接頭相容性。
AR6 直裝套件包含內容
卡鉗 ×2
2 × AR6 六活塞鍛造鋁合金前卡鉗，分左右專用。
煞車來令片
適用於兩側前卡鉗的煞車來令片，耐溫範圍 0–600 °C，專為鑄鐵／鋼製碟盤設計。
煞車碟盤 ×2
2 × Ø362 mm × 32 mm 兩件式前碟盤總成，內通風、曲線溝槽，分左右專用。
煞車油管 ×2
2 × 三層不鏽鋼編織煞車油管，內層為 PTFE、SUS304 編織層、PVC 保護外鞘，並配備車型專用接頭。
安裝五金
車型專用直裝五金，用於 Toyota LC200 / Lexus LX570 前軸安裝。
AR6 為直裝式前煞車套件。此配置不使用卡鉗轉接座。碟盤為兩件式碟盤總成，並非一體式碟盤。
是否適用於您的 LC200 或 LX570？
AR6 需要 17 吋或更大的輪圈，且輪輻間隙至少 102 mm。僅看輪圈直徑並不足夠；訂購前必須檢查輪輻形狀、偏移量、墊片使用情況，以及輪圈內桶輪廓。
1. 輪圈直徑
需使用 17 吋或更大輪圈。
2. 輪輻間隙
輪輻最小淨空：102 mm。下單前請確認輪輻形狀、偏距（ET 值）、墊片使用情況與輪圈內桶輪廓。
3. 車型
適用車型：2008-2021 Toyota Land Cruiser 200 / LC200 / J200 與 2008-2021 Lexus LX570，前軸，碟盤規格 Ø362 mm × 32 mm。
下單前請提供您的年份、車型等級、前煞車硬體照片、輪圈規格與使用需求，以便 TTSPORT 確認相容性。
LC200 & LX570 安裝與磨合
- 此 AR6 套件專為 Toyota LC200 與 Lexus LX570 前軸設計。
- 正確的前碟盤規格為 Ø362 mm × 32 mm，採兩片式碟盤組合。
- Direct-Mount 系列採用車型專用的前安裝幾何與車型專用煞車油管接頭。
- 煞車油管接頭因車型而異；下單前請確認年份、車型等級與前煞車硬體。
- 下單前請確認輪圈為 17 吋以上，且輪輻淨空至少 102 mm。
- 左／右專用碟盤請安裝於正確側別，以確保通風與弧形溝槽方向正確。
- 必須執行正確的磨合程序，使來令片材質均勻轉移至碟盤面，並穩定摩擦性能。
- 建議由合格的煞車技師進行專業安裝。
Toyota LC200 & Lexus LX570 AR6 前輪大煞車套件常見問題
這款 AR6 前輪套件能對應 Toyota LC200 與 Lexus LX570 嗎？
可以。此 AR6 Direct-Mount 前輪套件專為 2008-2021 Toyota Land Cruiser 200 / LC200 / J200 與 2008-2021 Lexus LX570 配置。正確的前碟盤規格為 Ø362 mm × 32 mm。
此 AR6 套件對應哪個軸別與碟盤尺寸？
此為前軸套件，採用 Ø362 mm × 32 mm 兩件式、內通風、方向性前碟盤總成，碟面為彎曲溝槽設計。
需要多大的輪圈尺寸與輪輻間隙？
需使用 17 吋或更大的輪圈，且輪輻與前卡鉗之間至少需有 102 mm 的間隙。僅看輪圈直徑並不夠；訂購前必須確認輪輻形狀、偏移量、墊片使用，以及輪圈內側輪廓。
AR6 的碟盤是一件式還是兩件式？
AR6 採用 Ø362 mm × 32 mm 兩件式前碟盤總成。請勿將此配置描述為一件式碟盤設定。
此套件是否使用卡鉗轉接座？
不需要。此為 Direct-Mount 系列 AR6 配置，採用直裝式前卡鉗與車型專用前安裝幾何。此配置不使用卡鉗轉接座。
隨附的來令片適合街道使用嗎？
是的。隨附來令片的工作溫度為 0–600 °C，平均 μ 值為 0.38，適合街道行駛、拖曳以及滿載 SUV 使用，可對應鑄鐵或鋼製碟盤。
我需要磨合刹车吗？
是的。需進行正確的磨合程序，使來令片材質均勻轉移到碟盤表面，並達到穩定的煞車性能。
準備好為您的 AR6 LC200 或 LX570 前煞車配置進行規劃了嗎？
需要前輪安裝確認、輪圈間隙檢查，或前後煞車匹配配置嗎？
保養指南
xBrake Kits · Fitment · Installation · Care Guide
Brake Kit Care Guide
A brake kit is not just a pair of larger calipers. Calipers, rotors, pads, hoses, brackets, rotor hats, mounting hardware, brake fluid, wheel clearance, and bedding procedure all work together as one system.
This guide explains how to confirm the right TTSPORT brake kit before ordering, what to check before installation, and how to care for the system after installation.
1. Before Ordering: Confirm the Full Vehicle Setup
Do not order a brake kit by vehicle name alone. The correct kit depends on the vehicle, axle position, wheel package, driving use, and brake system layout.
- Vehicle year, make, model, trim, market version, and chassis code if available
- Front or rear axle position
- Current brake rotor diameter, thickness, and caliper type if known
- Wheel diameter, width, offset, spoke shape, and inner barrel clearance
- Tire size and vehicle weight changes from armor, cargo, towing equipment, or track setup
- Driving use: daily street, towing, mountain driving, off-road, HPDE, rally, drift, track, or competition
- Whether the vehicle uses electronic parking brake, brake pad wear sensors, ABS / ESC systems, or special hydraulic routing
Wheel Clearance & Data Disclaimer: Technical fitment data applies strictly to rotor hats and mounting brackets—not wheel geometry. Wheel compatibility specs are provided for general reference only. Insufficient wheel clearance is not covered under warranty or data accuracy claims; if clearance is insufficient, wheel spacers must be added at the customer's discretion.
2. Understand What Type of Brake Kit You Are Ordering
Different TTSPORT brake kit series use different hardware layouts. Always confirm what the kit includes before purchase.
Direct-Mount Kits
Use direct-mount calipers and one-piece rotors where specified. These kits do not use rotor hats or caliper brackets unless the final product page clearly states otherwise.
Two-Piece Rotor Kits
Use separate friction rings and rotor hats. Hat offset, ring bolt pattern, hardware style, and rotor direction must be matched correctly.
Racing / Custom Kits
May require bespoke brackets, rotor hats, brake lines, and engineering confirmation based on knuckle, hub, wheel, and competition use.
Off-Road / Heavy Vehicle Kits
Require extra attention to wheel clearance, tire size, vehicle load, descent control, hose routing, and dust / water exposure.
Do not assume every brake kit includes the same parts. Package contents vary by product series, vehicle application, and final order configuration.
3. Confirm the Kit Specification Before Payment
Before finalizing the order, review the kit specification carefully. Confirm the brake kit is matched to your vehicle and wheel setup, not only to the model name.
- Confirm vehicle application and axle position
- Confirm caliper model, piston count, and caliper color if applicable
- Confirm rotor diameter, rotor thickness, rotor construction, and left / right direction if applicable
- Confirm brake pad compound and intended use
- Confirm brake hose fitting type and routing compatibility
- Confirm whether caliper brackets, rotor hats, mounting hardware, wear sensors, or brake fluid are included
- Confirm minimum wheel diameter and spoke clearance requirement
- Confirm lead time, shipping method, and final invoice details
If any part is not listed in the final order or product page, do not assume it is included.
4. Before Installation: Inspect the Complete Kit
Inspect every component before installation. Do not modify, grind, drill, stretch, force, or space brake kit components to make them fit.
- Check all received parts against the order confirmation
- Inspect calipers, rotors, brackets, hats, hoses, pads, and hardware for shipping damage
- Confirm left / right caliper and rotor orientation where applicable
- Confirm rotor size, pad shape, hose fittings, bracket layout, and hardware style before installation
- Clean all mounting faces before assembly
- Confirm torque values, bedding procedure, fluid type, and bleeding procedure before starting work
- Use a qualified brake technician for installation
Safety: Brake kits affect braking force, hydraulic sealing, heat control, wheel clearance, and vehicle stability. Do not install the kit if fitment, torque, direction, clearance, or compatibility is unclear.
5. Installation Checks
Correct installation is as important as the brake kit itself. A properly engineered kit can still perform poorly if installed with dirty mounting faces, incorrect torque, poor hose routing, or trapped air in the hydraulic system.
Caliper Position
Verify caliper centering over the rotor and confirm even pad sweep across the friction surface.
Rotor Orientation
Confirm left / right rotor direction if the rotor uses directional vanes or directional face pattern.
Brake Hose Routing
Check brake hose length and routing at full steering lock and full suspension travel. No twisting, rubbing, stretching, or kinking.
Wheel Clearance
Check caliper-to-spoke and caliper-to-barrel clearance before road use. Wheel specs are for general estimation only—clearance issues are excluded from warranty/data claims and may require user-supplied wheel spacers.
Brake Fluid & Bleeding
Use the correct brake fluid type and bleed the system until pedal feel is firm and consistent.
Hardware Security
Torque all brake hardware to the specified value. Do not reuse damaged, unknown, stretched, or corroded safety-critical fasteners.
6. Bedding and First Heat Cycle
Brake pads and rotors need a controlled bedding process before full performance is available. Bedding helps create an even transfer layer on the rotor surface, improving bite, pedal consistency, and vibration resistance.
- Follow the bedding procedure supplied with the exact pad and rotor compound
- Use moderate heat first unless the supplied procedure requires otherwise
- Do not start with emergency stops on a fresh pad / rotor setup
- Avoid holding the brake pedal while stopped on very hot pads and rotors
- Allow the brakes to cool after bedding
- After the first heat cycle, inspect pad contact, rotor surface, hose routing, hardware security, and fluid leaks
Street pads, race pads, iron rotors, two-piece rotors, and carbon ceramic rotors may require different bedding procedures. Use the procedure supplied with the specific kit.
7. Initial Break-In Period
After installation and bedding, give the system a short break-in period before aggressive use. Pedal feel, pad contact, dust output, and noise may continue to settle after the first drives.
- Avoid repeated emergency stops unless required for safety
- Avoid hard track use until bedding and inspection are complete
- Monitor pedal feel, vibration, noise, smell, and rotor surface appearance
- Recheck for fluid leaks after the first road test
- Recheck torque where the kit instructions require post-heat-cycle inspection
- Contact TTSPORT if brake feel changes suddenly after installation
8. Routine Care and Inspection
Brake kits need regular inspection, especially after track use, off-road use, towing, mountain driving, winter salt exposure, or any brake service.
- Inspect brake pads for uneven wear, taper, glazing, cracking, or backing-plate damage
- Inspect rotors for cracks, heavy scoring, hot spots, minimum thickness, and runout
- Inspect calipers for fluid seepage, piston movement, dust boot damage, and uneven pad retraction
- Inspect brake hoses for rubbing, cuts, swelling, leaks, and fitting corrosion
- Inspect brackets, rotor hats, and mounting hardware for cracks, fretting, corrosion, or loosening
- Check brake fluid level, color, service age, and boiling-point suitability for your driving use
- Clean brake dust from wheels and calipers regularly, especially after wet, salty, or track conditions
9. Care by Use Case
Daily Street
Inspect pads, rotors, fluid level, and hose condition during normal service intervals. Prioritize quiet operation, smooth pedal feel, and even wear.
Towing & Mountain Roads
Check pad thickness, rotor surface condition, and fluid condition more often. Long descents create sustained heat even without track use.
Off-Road
Inspect for mud, sand, stone impact, hose abrasion, dust boot damage, and caliper contamination after trail use.
Track / HPDE
Inspect pads, rotors, fluid, and hardware before and after every event. Track heat shortens service intervals.
Drift / Competition
Check rear brake temperature, hydraulic handbrake behavior, pad wear, rotor cracking, and hardware condition frequently.
Carbon Ceramic
Use only compatible pads and approved bedding procedures. Inspect rotor surface condition carefully and avoid incompatible friction materials.
10. Stop Driving If You Notice These Symptoms
Do not continue driving if the brake system shows any of the following symptoms. Inspect the system or contact a qualified brake technician before using the vehicle again.
- Soft pedal, sinking pedal, or sudden increase in pedal travel
- Brake fluid leak or wetness near a line, caliper, fitting, or master cylinder
- Grinding, scraping, severe vibration, or heavy brake judder
- Vehicle pulling strongly to one side under braking
- Burning smell after light driving
- Loose wheel, rotor, caliper, bracket, or hardware noise
- Brake warning light, ABS warning light, or traction-control fault after brake work
Need help confirming brake kit setup or care?
Send your vehicle details, brake kit series, wheel specs, driving use, photos, and any symptoms you notice. TTSPORT will help confirm fitment, installation checks, and the correct care path for your brake kit.
- 選擇結果將重新載入完整頁面。