Haval H2 Big Brake Kit Upgrade / TTSPORT Classic 8611S
The Haval H2 has been a budget-friendly small SUV favorite since 2014, but its factory brakes were built for daily commuting, not for owners who've added turbo tunes or just want a firmer pedal in traffic. This build swaps the stock front setup for a TTSPORT Classic Series 8611S six-piston big brake kit, giving the H2 real stopping hardware to match its more spirited owners.
The kit fits behind the H2's 18-inch factory wheels, so the owner didn't need to change wheel offset or add spacers to make the larger caliper and rotor clear the spokes.
Vehicle & Kit Specs
| Item | Specification |
|---|---|
| Vehicle | Haval H2, 18-inch factory wheels |
| Front caliper | TTSPORT 8611S forged six-piston caliper |
| Front rotor | TTSPORT 355mm rotor with scalloped-edge design |
| Bracket | Vehicle-specific caliper bracket, direct-mount |
| Pads / lines | TTSPORT high-performance brake pads, stainless steel brake lines |
| Hardware | Brake fluid, mounting bolts, and fixing hardware |
The table below is TTSPORT's official spec sheet for the 8611S caliper used in this install.
| Brake Caliper | |
|---|---|
| Series | Classic Series |
| Model / Application | 8611S |
| Axle Position | Front |
| Piston Count | 6-piston |
| Piston Type | Star-profile racing pistons without dust boots |
| Piston Diameter | 28 mm × 4 / 41 mm × 2 |
| Caliper Dimensions | L 243 mm × W 129 mm × H 71 mm |
| Total Piston Area | 51.0 cm² per caliper, all pistons combined |
| Manufacturing Process | Two-piece forged aluminum body |
| Net Weight | 2.10 kg per caliper, without pads |
| Surface Finish | High-temperature gloss coating |
| Recommended Wheel Size | 17 in or larger |
| Recommended Rotor Size | Ø330–355 mm × 28 mm |
| Fitment & Installation | |
| Minimum Spoke Clearance (mm) | 82 |
| Caliper Mounting Type | Radial mount with vehicle-specific caliper brackets |
| Brake Line Fitting Type | Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application |
The kit ships complete: caliper, rotor, bracket, pads, stainless lines, and the hardware needed to bolt it up without sourcing extra parts.
Why It Works
The 8611S is a two-piece forged aluminum caliper, which is stiffer under load than a cast single-piece body — less flex at the caliper means less pedal travel before the pads actually bite. Its six-piston layout (four 28mm pistons and two 41mm pistons per caliper) spreads clamping force more evenly across the pad than a factory single or dual-piston floating caliper, which improves both bite and pedal linearity.
- Six-piston clamping spreads force more evenly across the pad surface than the factory caliper
- High-friction pads matched to the caliper give a more predictable, linear brake response
- The 355mm rotor's floating structure reduces thermal expansion effects for longer rotor life
- Fits behind the H2's factory 18-inch wheels with a vehicle-specific bracket — no spacers
Installation Gallery
FAQ
What brake kit is fitted to this Haval H2?
What wheel size does the 8611S kit run behind on this H2?
How many pistons does the TTSPORT 8611S caliper have, and how is it built?
Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.