Skip to content

Email: sales@ttsport-racing.com

Zeekr 001 Big Brake Kit Upgrade / TTSPORT Classic 8657S

by LinLynn 16 Jul 2026

Since its debut in 2021, the Zeekr 001 has built a following on its shooting-brake styling, big-battery range, and fast-paced tech updates. But the factory brake system on this car was set up for daily driving, not sustained high-speed or hard-braking use — and this owner decided it was time to close that gap without touching the wheels.

Zeekr 001 rear three-quarter view before TTSPORT big brake kit installation

The stock Zeekr 001 comes with single-side dual-piston cast-iron calipers — adequate for commuting, but with real headroom left on the table during hard driving or extended highway speeds. The factory 19-inch dual-spoke wheels, however, were already sized generously enough to accommodate a larger brake package, so a wheel swap wasn't part of this build.

Vehicle & Kit Specs

This install pairs a TTSPORT Classic Series six-piston front caliper with a TTSPORT EP4 electromechanical rear caliper, both running behind the car's stock 19-inch wheels.

Item Specification
Vehicle Zeekr 001, 19-inch OEM wheels, no wheel change required
Front caliper TTSPORT 8657S forged six-piston caliper (Classic Series)
Front rotor TTSPORT 405mm curved-vane rotor
Rear caliper TTSPORT EP4 electromechanical caliper (four-piston service brake + integrated electronic parking brake)
Rear rotor TTSPORT 380mm curved-vane rotor
Bracket Custom vehicle-specific caliper brackets, front and rear
Pads / lines TTSPORT high-performance brake pads, TTSPORT stainless steel brake lines
Hardware Brake fluid, mounting bolts, and fitting hardware

Here's the full official spec sheet for the front TTSPORT 8657S caliper used in this build:

TTSPORT 8657S — Specifications
Brake Caliper
Series Classic Series
Model / Application 8657S
Axle Position Front
Piston Count 6-piston
Piston Type Two-piece heat-insulated pistons with dust boots
Piston Diameter 30 mm × 2 / 34 mm × 2 / 38 mm × 2
Caliper Dimensions L 350 mm × W 165 mm × H 92.64 mm
Total Piston Area 55.0 cm² per caliper, all pistons combined
Manufacturing Process Two-piece forged aluminum body
Net Weight 4.05 kg per caliper, without pads
Surface Finish High-temperature gloss coating
Recommended Wheel Size 18 in or larger
Recommended Rotor Size Ø355–405 mm × 32–34 mm
Fitment & Installation
Minimum Spoke Clearance (mm) 107
Caliper Mounting Type Radial mount with vehicle-specific caliper brackets
Brake Line Fitting Type Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application
TTSPORT 8657S six-piston front caliper and 405mm rotor tucked behind Zeekr 001 19-inch wheel

Because the 8657S mounts on a vehicle-specific bracket sized to keep the caliper and 405mm rotor within the factory wheel's spoke clearance, the whole front assembly fits behind the stock 19-inch wheel with no spacers involved.

Why It Works

  • The 8657S is a forged, two-piece six-piston caliper — the rigid body resists flex under hard pedal pressure, which is what firms up the pedal feel compared to the stock single-side dual-piston cast-iron caliper.
  • Stepping up to a 405mm front rotor and 380mm rear rotor adds swept area and thermal mass over the stock discs, giving the system more capacity to absorb heat before fade sets in.
  • Two-piece heat-insulated pistons and dust boots on both the 8657S and the EP4 keep heat from soaking back into the brake fluid, which helps maintain a consistent pedal during repeated hard stops.
  • Vehicle-specific brackets on both axles place the calipers and rotors within the stock 19-inch wheel's clearance, so this remains a bolt-on upgrade without wheel or spacer changes.
  • The rear EP4 caliper keeps the four-piston service brake and the electronic parking brake in one unit, so the factory EPB function carries over after the swap.

Installation Gallery

Frequently Asked Questions

Does the TTSPORT big brake kit require larger wheels on the Zeekr 001?
No. The Zeekr 001's stock 19-inch dual-spoke wheels already have enough clearance, so this kit bolts on without any wheel change.
What does the TTSPORT kit include for this Zeekr 001 build?
The front axle gets a TTSPORT 8657S six-piston caliper with a 405mm curved-vane rotor, the rear axle gets a TTSPORT EP4 electromechanical caliper with a 380mm curved-vane rotor, plus vehicle-specific brackets, high-performance pads, stainless steel lines, brake fluid, and mounting hardware.
Does the rear TTSPORT EP4 caliper still work with the electronic parking brake?
Yes. The EP4 is an electromechanical caliper that integrates a single-piston electronic parking brake unit alongside its four-piston service brake section, so the factory EPB function is retained.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger