Skip to content

Email: sales@ttsport-racing.com

WEY Blue Mountain Big Brake Kit Upgrade / TTSPORT Slim SL8

by LinLynn 16 Jul 2026

Since its launch, the WEY Blue Mountain has carried the banner of China's premium new-energy SUV segment — big cabin, smart tech, and, more recently, serious dual-motor power. As output and curb weight climbed, some owners started to notice something the spec sheet doesn't advertise: the factory brakes were running out of headroom.

WEY Blue Mountain SUV parked with TTSPORT Slim SL8 big brake kit installed

Owners of this platform tend to be practical rather than flashy about upgrades. What they wanted wasn't a race-car look — it was a caliper that could match the SUV's power and weight without forcing a wheel swap or spacers.

The Problem: More Motor, Same Pedal

WEY Blue Mountain front wheel showing stock brake clearance before SL8 caliper install

The requirements this owner brought to the shop were specific: keep the factory 20-inch wheels with no cutting and no spacers, step up to a multi-piston caliper sized for the vehicle's mass, chase weight savings and heat stability at the rotor, and do it all without wrecking daily-driving comfort or NVH. That rules out a generic bolt-on kit — it calls for hardware engineered around this exact hub and wheel package.

Vehicle & Kit Specs

WEY Blue Mountain front hub prepped for TTSPORT SL8 caliper and bracket installation

The front axle gets a TTSPORT SL8 eight-piston caliper matched with a vehicle-specific bracket and a 405mm carbon-ceramic rotor — sized and profiled to clear the stock wheel without a flange or adapter.

Item Specification
Vehicle WEY Blue Mountain SUV, factory 20-inch wheels, direct-fit — no spacers required
Front caliper TTSPORT SL8 forged eight-piston caliper
Front rotor 405mm LCCB carbon-ceramic rotor
Bracket Custom vehicle-specific caliper bracket, direct-mount to the factory hub
Pads / lines High-performance carbon-ceramic brake pads; TTSPORT stainless steel brake lines
Hardware Brake fluid, mounting bolts, and fasteners

Below is the official TTSPORT SL8 caliper spec sheet for the exact caliper used in this build:

TTSPORT SL8 — Specifications
Brake Caliper
Series Slim Series
Model / Application SL8
Axle Position Front
Piston Count 8-piston
Piston Type One-piece heat-insulated pistons with dust boots
Piston Diameter 28 mm × 4 / 32 mm × 4
Caliper Dimensions L 391 mm × W 128 mm × H 144 mm
Total Piston Area 56.8 cm² per caliper, all pistons combined
Manufacturing Process Two-piece forged aluminum body
Net Weight 5.20 kg per caliper, without pads
Surface Finish High-temperature gloss coating
Recommended Wheel Size 19 in or larger
Recommended Rotor Size Ø380–405 mm × 34 mm
Fitment & Installation
Minimum Spoke Clearance (mm) 90
Caliper Mounting Type Radial mount with vehicle-specific caliper brackets
Brake Line Fitting Type Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application

Why It Works

TTSPORT SL8 eight-piston caliper mounted on WEY Blue Mountain front hub with carbon-ceramic rotor

A forged two-piece caliper body flexes less under load than a cast single-piece unit, so more of the pedal input goes into clamping force instead of caliper distortion — that's what gives the pedal a firmer, more linear feel. The eight-piston symmetrical layout also spreads clamping pressure more evenly across the pad, which helps the front end bite consistently instead of biasing to one side.

  • Carbon-ceramic rotor mass is lower than a comparable steel disc, cutting unsprung weight at each corner and helping the suspension react faster over rough pavement.
  • Carbon-ceramic material resists fade under repeated hard stops better than steel, which matters when a heavy dual-motor SUV is scrubbing speed from highway numbers back to back.
  • The caliper and bracket are sized to clear the Blue Mountain's stock 20-inch wheel, so there's no spacer, no offset change, and no compromise to factory ride geometry.

None of this changes the SUV's factory look — the wheels stay stock, the ride stays the same — but the braking reserve is now sized to match the power under the hood.

Installation Gallery

FAQ

Does the TTSPORT SL8 kit fit the WEY Blue Mountain's factory 20-inch wheels without spacers?
Yes. This build uses the WEY Blue Mountain's stock 20-inch wheels with the TTSPORT SL8 caliper and a vehicle-specific bracket, requiring no cutting or wheel spacers.
What's included in this TTSPORT SL8 big brake kit?
The front kit includes TTSPORT SL8 eight-piston forged calipers, a custom vehicle-specific caliper bracket, high-performance carbon-ceramic brake pads, TTSPORT stainless steel brake lines, brake fluid, and mounting hardware.
What rotor size pairs with the SL8 caliper on this build?
This install pairs the SL8 caliper with a 405mm carbon-ceramic (LCCB) rotor on the front axle.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger