Skip to content

Email: sales@ttsport-racing.com

Toyota Camry Big Brake Kit Upgrade / TTSPORT Classic 9040

by LinLynn 16 Jul 2026

The Toyota Camry is a familiar face on US and Chinese roads alike, and this TNGA-platform generation built by GAC Toyota isn't shy on power — a 2.5L engine rated at 209 hp and 250 Nm of torque, with throttle response quick enough to make passing effortless. That kind of motor deserves a brake system that can match it, which is exactly why this Camry owner brought the car in for a front brake upgrade.

Toyota Camry fitted with TTSPORT TT9040 six-piston big brake kit behind 18-inch wheel

Behind the factory 18-inch wheel, the stock single-piston caliper and small rotor left the pedal feeling soft under hard braking — a common complaint on Camrys pushed anywhere near their power ceiling. The fix here was a front-axle swap to the TTSPORT TT9040 kit.

Vehicle & Kit Specs

Item Specification
Vehicle Toyota Camry (TNGA platform, GAC Toyota production), 18-inch wheels
Front caliper TTSPORT TT9040 six-piston forged caliper, piston diameters 38mm / 32mm / 27mm, total piston area 50.2 cm²
Front rotor 355 x 32mm high-carbon, heat-treated curved-vane rotor
Brake lines TTSPORT PTFE-lined stainless steel brake lines
TT9040 forged six-piston caliper mounted on Toyota Camry front axle before wheel installation

The TT9040 is a six-piston, opposed-caliper design — three different bore sizes per side rather than one uniform piston, which spreads clamping pressure more evenly across the pad face as it wears.

Why It Works

  • Larger total piston area (50.2 cm² across six pistons) increases clamping force at the pad compared with the Camry's factory single-piston caliper, and it's matched to the OE master cylinder so pedal travel doesn't change.
  • The opposed six-piston layout responds more evenly to pedal input, which is what gives the brake a firmer, more predictable feel instead of a soft, progressive squish.
  • PTFE-lined stainless steel lines resist the expansion that rubber lines suffer under heat and pressure, cutting the delay between pedal input and pad contact.
  • The kit was installed and confirmed to clear the Camry's factory 18-inch wheels in this case.

Installation Gallery

FAQ

What wheel size does this Camry big brake kit fit under?
This installation was fitted to a Toyota Camry running 18-inch wheels, with the TT9040 kit installed as shown without any mention of spacers.
What's included in the TTSPORT TT9040 Camry brake kit?
The kit used on this Camry includes the TT9040 six-piston forged caliper, a 355x32mm high-carbon heat-treated curved-vane rotor, and TTSPORT PTFE-lined stainless steel brake lines.
How does the TT9040 caliper improve braking over the stock setup?
The TT9040 uses six opposed pistons (38mm, 32mm, and 27mm diameters) for a total piston area of 50.2 cm², which is larger than the Camry's factory single-piston caliper and matched to the stock master cylinder to increase clamping force.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger