Skip to content

Email: sales@ttsport-racing.com

Porsche 718 Big Brake Kit Upgrade / TTSPORT Evolution EB8/ES4

by LinLynn 16 Jul 2026

Stock brakes on a performance car like the Porsche 718 can start feeling overwhelmed once you push into track days or spirited mountain driving — pedal travel grows, fade creeps in, and confidence drops. This case comes from our authorized distributor in Malaysia, who fitted a customer's 718 with a TTSPORT Evolution Series big brake kit: an eight-piston EB8 up front and a four-piston ES4 out back.

Porsche 718 fitted with TTSPORT Evolution EB8 front eight-piston yellow big brake caliper

The car rides on 20-inch wheels, which leaves enough room behind the spokes for a genuine big-caliper upgrade without touching wheel offset or spacers.

Vehicle & Kit Specs

Here's the hardware breakdown for this build, straight from the install sheet.

Item Specification
Vehicle Porsche 718, 20-inch wheels
Front caliper TTSPORT EB8 forged eight-piston caliper
Front rotor TTSPORT 405x34mm high-carbon heat-treated slotted rotor
Rear caliper TTSPORT ES4 forged four-piston caliper
Rear rotor TTSPORT 380x28mm high-carbon heat-treated slotted rotor
Bracket Vehicle-specific caliper brackets, front and rear
Pads / lines TTSPORT high-performance street pads, stainless steel brake lines
Hardware Brake fluid, mounting bolts, and fitting hardware

The front EB8 caliper's full spec sheet is below.

TTSPORT EB8 — Specifications
Brake Caliper
Series Evolution Series
Model / Application EB8
Axle Position Front
Piston Count 8-piston
Piston Type Two-piece heat-insulated pistons with dust boots
Piston Diameter 28 mm × 4 / 32 mm × 4
Caliper Dimensions L 349 mm × W 166 mm × H 98 mm
Total Piston Area 56.8 cm² per caliper, all pistons combined
Manufacturing Process Two-piece forged aluminum body
Net Weight 4.95 kg per caliper, without pads
Surface Finish High-temperature gloss coating
Recommended Wheel Size 19 in or larger
Recommended Rotor Size Ø380–405 mm × 34 mm
Fitment & Installation
Minimum Spoke Clearance (mm) 107
Caliper Mounting Type Radial mount with vehicle-specific caliper brackets
Brake Line Fitting Type Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application

And here's the rear ES4 caliper's full spec sheet.

TTSPORT ES4 — Specifications
Brake Caliper
Series Evolution Series
Model / Application ES4
Axle Position Rear
Piston Count 4-piston
Piston Type Two-piece heat-insulated pistons with dust boots
Piston Diameter 28 mm × 2 / 32 mm × 2
Caliper Dimensions L 255 mm × W 139 mm × H 74 mm
Total Piston Area 28.4 cm² per caliper, all pistons combined
Manufacturing Process Two-piece forged aluminum body
Net Weight 2.80 kg per caliper, without pads
Surface Finish High-temperature gloss coating
Recommended Wheel Size 18 in or larger
Recommended Rotor Size Ø345–380 mm × 28 mm
Fitment & Installation
Minimum Spoke Clearance (mm) 90
Caliper Mounting Type Radial mount with vehicle-specific caliper brackets
Brake Line Fitting Type Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application

Why It Works

TTSPORT Evolution EB8 forged front caliper installed behind Porsche 718 20-inch wheel

Up front, the EB8's eight-piston, two-piece forged design spreads clamping force more evenly across the pad than a smaller stock caliper can. The open, heavily-relieved caliper body and two-piece heat-insulated pistons help pull heat away from the fluid and pads faster, which matters most when the car is being worked hard for more than one hot lap or one hard descent.

  • Stronger, more even clamping force from the front eight-piston EB8 caliper for more stable, more repeatable stops.
  • Open caliper body and two-piece heat-insulated pistons dissipate heat more effectively, helping resist fade under sustained hard braking.
  • Rear ES4 four-piston calipers balance front-to-rear brake bias, reducing the risk of the rear stepping out under hard braking, especially on wet or uneven pavement.
  • Adding real rear brake capacity evens out pad wear front-to-rear, which stretches service life on the whole brake system.

Installation Gallery

What wheel size does this Porsche 718 TTSPORT big brake kit fit?
This build runs 20-inch wheels. TTSPORT lists the EB8 front caliper as fitting 19-inch wheels or larger, and the ES4 rear caliper as fitting 18-inch wheels or larger.
What's included in the TTSPORT kit used on this 718?
The kit includes forged TTSPORT EB8 eight-piston front calipers, forged TTSPORT ES4 four-piston rear calipers, 405x34mm and 380x28mm high-carbon heat-treated slotted rotors, vehicle-specific caliper brackets, TTSPORT high-performance street pads, stainless steel brake lines, brake fluid, and mounting hardware.
What rotor sizes are compatible with the EB8 and ES4 calipers?
Per the source, the EB8 front caliper can be paired with 380mm or 405mm high-carbon heat-treated rotors, and the ES4 rear caliper can be paired with 345mm, 355mm, or 380mm rotors, depending on wheel size.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger