Skip to content

Email: sales@ttsport-racing.com

Honda Fit/Jazz (GK5) Big Brake Kit Upgrade / TTSPORT Direct-Mount Series

by LinLynn 16 Jul 2026

A Front Brake Upgrade for the Honda Fit GK5

The third-generation Honda Fit (GK5) is a small car with a genuinely global following, but its stock front brakes are sized for everyday commuting, not spirited driving. This install case swaps in a TTSPORT front kit built specifically for the GK5: a larger four-piston caliper matched with a 285mm one-piece rotor, aimed at eliminating brake fade and giving the pedal a firmer, more confidence-inspiring feel.

TTSPORT four-piston front caliper and 285mm one-piece rotor mounted on a Honda Fit GK5

The kit was built around the GK5's front axle geometry, so the caliper and rotor combination bolts in without spacers or other workarounds. The rotor is a one-piece (non-floating) design finished at 285x20mm.

Vehicle & Kit Specs

Item Specification
Vehicle Honda Fit (GK5), front axle
Front caliper Enlarged four-piston caliper, piston and pad dimensions matched to the OEM 5200-series pad reference
Front rotor TTSPORT 285x20mm one-piece rotor
Compatibility Rotor works with either the factory GK5 caliper or the dedicated OEM-position four-piston caliper for this platform
Finish options Custom caliper paint colors available on request

Why It Works

Close-up of TTSPORT four-piston caliper compatible with Honda Fit GK5 factory and upgraded mounting

A four-piston caliper spreads clamping force across more pad area than the stock unit, which means more consistent friction and less flex under hard braking. Pairing it with a larger 285mm rotor adds thermal mass, so the system sheds heat more effectively and resists fade during repeated stops.

  • Larger rotor diameter (285mm vs. stock) increases swept area and heat capacity, reducing fade under repeated braking.
  • Four-piston clamping distributes pressure more evenly across the pad than a stock single- or dual-piston design, improving pedal feel.
  • The rotor and caliper are matched to the GK5's factory mounting geometry, so the installer reported no vibration and no need for spacers.

Installation Gallery

FAQ

Will this TTSPORT rotor work with the factory GK5 caliper?
Yes. The 285x20mm one-piece rotor is designed to bolt up to the stock Fit GK5 caliper, and it also fits the dedicated OEM-position four-piston caliper offered for this platform.
Did the installer report any vibration after this brake upgrade?
According to the installer, the front kit went on without any shimmy or pedal vibration and delivered a noticeable improvement in stopping power over the stock setup.
Can the caliper be finished in a different color?
Yes, the caliper can be custom painted to order, as shown in this case with both a standard finish and a pink option.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger