Skip to content

Email: sales@ttsport-racing.com

MG 6 Big Brake Kit Upgrade / TTSPORT Classic 6410

by LinLynn 16 Jul 2026

MG's 6 has built its reputation on quick, sporty handling — three generations in, the sedan still leans on "safety fast" as a tagline, backed by standard XDS torque vectoring and the latest ESC stability control. To match that chassis tuning, this MG 6 gets a TTSPORT TT6410 four-piston big brake kit up front: a forged caliper, a 355x32mm high-carbon heat-treated rotor, and stainless steel lines, all fitted behind the car's factory 18-inch wheels.

TTSPORT Classic TT6410 four-piston big brake kit installed on an MG 6 sedan with 18-inch wheels

The TT6410 is a large, split-body four-piston caliper built with a cast construction meant to hold up under repeated hard stops. It runs two pairs of differently sized pistons facing each other — 44mm on the outer side, 40mm on the inner — for a combined piston area of 55.52 cm². That's the reasoning behind the "big four-piston" name: more piston area against the pad means more clamping force, and a more linear, controllable pedal.

Vehicle & Kit Specs

Item Specification
Vehicle MG 6, 18-inch wheels
Front caliper TTSPORT TT6410 forged four-piston caliper, differential-bore design (44mm / 40mm staggered pistons)
Front rotor TTSPORT 355x32mm high-carbon heat-treated curved-vane rotor
Lines TTSPORT stainless steel brake lines

Why It Works

  • Staggered 44mm/40mm pistons give the TT6410 a total piston area of 55.52 cm², so the pads press against the rotor with more even, controllable force instead of an on/off feel.
  • The forged, split-body caliper resists flex under hard, repeated braking, which helps keep pedal feel consistent rather than going soft as the system heats up.
  • The 355x32mm high-carbon heat-treated rotor adds mass and surface area over a smaller stock disc, so it absorbs and sheds more heat before fade sets in, with a higher friction coefficient against the pad.
  • The kit is sized to run behind the MG 6's factory 18-inch wheels, so there's no wheel swap required to fit the bigger front brakes.

Installation Gallery

Frequently Asked Questions

What wheel size does this MG 6 TT6410 brake kit fit behind?
This kit is installed with the MG 6's factory 18-inch wheels, with no spacers or wheel changes needed for this application.
What does the TTSPORT TT6410 kit include for the MG 6?
As installed, the kit includes the TT6410 forged four-piston caliper, a 355x32mm high-carbon heat-treated rotor, and TTSPORT stainless steel brake lines.
Why is the TT6410 called a "big four-piston" caliper?
It uses a differential-bore, split-body design with staggered 44mm and 40mm pistons per side, for a total piston area of 55.52 cm², giving stronger, more linear clamping force than a smaller single-size caliper.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger