Skip to content

Email: sales@ttsport-racing.com

Mercedes-Benz C-Class (W205) Big Brake Kit Upgrade / TTSPORT Classic 8703

by LinLynn 16 Jul 2026

The W205-generation C-Class is one of Mercedes' more athletic small sedans, and this owner's 1.5T car — good for roughly 184 horsepower and an eight-second-range 0-60 — was starting to outrun its stock brakes on spirited drives. Rather than a full track-brake overhaul, the fix here was straightforward: a six-piston TTSPORT big brake kit up front and a direct-fit oversized rotor kit out back, all tucked behind the car's stock 19-inch wheels.

Mercedes-Benz W205 C-Class front corner with TTSPORT TT8703 six-piston caliper installed

Front axle: TTSPORT TT8703 connected (monobloc) six-piston caliper matched to a 380mm x 34mm high-carbon, heat-treated, cross-drilled rotor. Rear axle: TTSPORT 340mm x 12mm oversized rotor and stainless brake lines, both installed in the OEM mounting position.

Vehicle & Kit Specs

Item Specification
Vehicle Mercedes-Benz C-Class (W205), 19-inch wheels
Front caliper TTSPORT TT8703 monobloc six-piston fixed caliper
Front rotor 380mm x 34mm high-carbon, heat-treated, cross-drilled rotor
Rear rotor TTSPORT 340mm x 12mm oversized rotor, direct fit at the stock mounting position
Rear lines TTSPORT stainless steel brake lines

Why It Works

The TT8703's six-piston design is built around a wide rotor range — 355mm to 405mm in diameter, 32mm to 34mm thick — which means more pad surface area contacting the disc. More clamping surface translates into stronger, more consistent bite whether you're braking hard once or repeatedly through a mountain road.

  • Larger 380mm front rotor adds thermal mass, helping resist fade under repeated hard stops.
  • Cross-drilled rotor surface helps clear gas and debris for a more consistent pedal.
  • Rear 340x12mm rotor bolts to the factory mounting point, no bracket modification needed at the rear axle.

Pairing an oversized rear rotor with the front six-piston kit balances brake bias front-to-rear, so the added front stopping power isn't fighting an unchanged rear axle. It's also a cost-effective way to upgrade the rear half of the system without touching the caliper hardware back there.

Installation Gallery

FAQ

What does the TTSPORT kit include on this W205 build?
The front axle got a TTSPORT TT8703 monobloc six-piston fixed caliper paired with a 380mm x 34mm high-carbon, heat-treated, cross-drilled rotor. The rear axle was upgraded with a TTSPORT 340mm x 12mm oversized rotor and stainless steel brake lines, installed at the stock mounting position.
What rotor sizes does the TT8703 caliper support?
The TT8703's six-piston layout is designed to run rotors from 355mm to 405mm in diameter and 32mm to 34mm in thickness. This W205 build uses a 380mm x 34mm rotor, in the middle of that range.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger