Skip to content

Email: sales@ttsport-racing.com

Audi A3 Big Brake Kit Upgrade / TTSPORT Classic 6410

by LinLynn 16 Jul 2026

This Audi A3 runs a 1.4T turbocharged engine — 110 kW and 250 Nm routed through a 7-speed dual-clutch gearbox — so it has enough punch to make the stock brakes feel undersized in daily driving. The owner addressed that with a front-axle upgrade to a TTSPORT TT6410 four-piston kit, paired with larger rotors and stainless lines, all tucked behind the car's factory 18-inch wheels.

Audi A3 front fascia with TTSPORT TT6410 big brake kit installed

Stock single-piston sliding calipers on a compact hatchback like the A3 are built for cost and NVH, not repeated hard stops. Pedal feel goes soft under load as the caliper body flexes and the small pad contact patch struggles to shed heat. Swapping in a fixed four-piston caliper and a larger rotor changes both sides of that equation without touching the car's factory wheel fitment.

Vehicle & Kit Specs

Item Specification
Vehicle Audi A3, 1.4T engine, 7-speed DCT, 18-inch wheels
Front caliper TTSPORT TT6410 cast four-piston caliper, custom red finish
Front rotor TTSPORT 355 x 32mm high-carbon heat-treated curved-vane rotor
Lines TTSPORT stainless steel braided brake lines (pair)
Hardware Custom red-finished mounting brackets and brake fluid

Why It Works

TTSPORT TT6410 caliper and 355mm rotor kit components for Audi A3
  • A fixed four-piston caliper doesn't flex under pedal load the way a factory sliding single-piston caliper does, so more of the pedal input goes into clamping force instead of caliper deflection.
  • Stepping up to a 355x32mm rotor adds mass and surface area over the stock disc, giving the system more thermal capacity before fade sets in on repeated stops.
  • The kit was sized to clear the A3's factory 18-inch wheels, so there's no need for spacers or a wheel change to run the bigger front hardware.
  • Stainless steel lines replace the factory rubber hoses, cutting down on line expansion under pressure so pedal travel stays more consistent lap after lap.

Installation Gallery

FAQ

What does the TTSPORT kit on this Audi A3 include?
The front upgrade consists of a TT6410 cast four-piston caliper, a 355x32mm high-carbon heat-treated curved-vane rotor, TTSPORT stainless steel brake lines, custom-finished mounting brackets, and brake fluid.
What wheel size does this A3 run with the TT6410 kit?
The car in this case runs 18-inch wheels, which clear the TT6410 caliper and 355mm rotor without spacers.
What color are the calipers in this installation?
The owner chose a custom red finish on the TT6410 calipers, paired with red-finished mounting brackets.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger