مجموعة فرامل سباق الرالي بتبريد ماء PB6 للعجلة الأمامية بستة مكابس

$1,760.00 USD
$1,760.00 USD

كتلة النص

Shipping costs not included

لون الكالبر: كروم
حجم الدوار: 320x34mm (العجلة ≥ 17″)
مادة وتصميم الدوار: الفولاذ - WaveSlot™
Complete TTSPORT PB6 watercooling front wheel rally brake kit, showing the 6-piston calipers, J-hock rotors, performance pads, and steel-braided brake lines.

مجموعة فرامل سباق الرالي بتبريد ماء PB6 للعجلة الأمامية بستة مكابس

$1,760.00

مجموعة فرامل سباق الرالي بتبريد ماء PB6 للعجلة الأمامية بستة مكابس

$1,760.00
لون الكالبر: كروم
حجم الدوار: 320x34mm (العجلة ≥ 17″)
مادة وتصميم الدوار: الفولاذ - WaveSlot™
المكبس
السلسلة سلسلة السباقات - سباق الرالي
الطراز PB6 تبريد مائي
موقع التركيب الأمامي
عدد المكابس 6
نوع المكبس مكابس سباق بدون أغطية غبار
قطر المكبس 28 مم × 2، 34 مم × 2، 40 مم × 2
الأبعاد الطول 280 مم × العرض 169 مم × الارتفاع 85 مم
إجمالي مساحة المكبس 55.58 سم²
عملية التصنيع من قطعتين مزورة
الوزن الصافي 3.44 كجم (مكبس واحد بدون وسادات)
تشطيب السطح طلاء كروم
حجم العجلة الموصى به 17 بوصة أو أكبر
حجم القرص الموصى به ⌀320 مم / سمك 32 مم
قرص الفرامل
المادة فولاذ عالي الكربون مع معالجة حرارية
موقع التركيب الأمامي
الأبعاد ⌀320 مم × 34 مم
البناء قرص من قطعتين
مفتوح / صلب مفتوح
عائم / ثابت عائم
اتجاهي (مخصص لليسار / اليمين) نعم
التصميم WaveSlot
وسادة الفرامل
مواد الأقراص المتوافقة أقراص فولاذية
نطاق درجة حرارة التشغيل 0-550 °م
معامل الاحتكاك 0.4 μ-0.46 μ
خرطوم الفرامل
البناء معزز بثلاث طبقات
المادة الداخلية: PTFE (تفلون)؛ الوسطى: SUS304 من الفولاذ المقاوم للصدأ المجدول؛ الخارجية: غلاف PVC
حامل القرص
عملية التصنيع معالج باستخدام CNC
المادة سبائك الألومنيوم من الدرجة الجوية
مشبك المكبس
عملية التصنيع معالج باستخدام CNC
المادة فولاذ الكربون

Brake Kit Purchase Notice


  • Custom‑made products cannot be returned unless there is a genuine quality defect.
  • Spacer requirements vary depending on wheel design; we assist with fitment, but spacer‑related issues do not qualify for returns.

1. Disclaimer

  1. Please provide vehicle make, model year, VIN, and wheel size before ordering TTSPORT products.
  2. Confirm wheel measurements and submit photos as requested — TTSPORT is not liable for issues arising from incorrect specs.
  3. All products are inspected before shipping. Inspect upon delivery and report quality issues within 24 hours.

2. Initial Break‑In Procedure

  1. In a safe area, brake from 60 km/h to 10 km/h with moderate pressure—repeat 10 times.
  2. Drive 500–1,000 km with light to moderate usage before full braking performance. Avoid aggressive stops.
  3. Our high‑carbon steel discs have grooved, color‑treated surfaces to help quick bedding and resist corrosion.

3. Product Warranty

  • Calipers: 1‑year warranty on defects. Lifetime maintenance available (parts charged).
  • Discs & Hoses: 90‑day warranty for defects. Expected lifespan: 40,000–60,000 km.
  • Brake Pads: 90‑day coverage. Typical lifespan: 20,000–40,000 km.
  • Custom Hats/Brackets: Fit guaranteed; no warranty post-installation.

4. Usage & Maintenance

  1. Do not wash immediately after hard braking to prevent rotor warpage.
  2. Allow extra stopping distance when driving in wet conditions.
  3. If you experience unusual noise or vibration, consult your installer immediately.

Recommended service intervals:

  • Replace rotors when wear exceeds 3 mm.
  • Front pads: every 30,000 km.
  • Rear pads: every 50,000–60,000 km.
  • Brake fluid: every 40,000 km or every 2 years.

#Related Products

#Recently Viewed Products