TTSPORT Caliper Dust Boot main product photo
TTSPORT Caliper Dust Boot main product photo

Caliper Dust Boot

Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Subtotal: Dhs. 38.00
TTSPORT Caliper Dust Boot main product photo

Caliper Dust Boot

Dhs. 38.00
TTSPORT Caliper Dust Boot main product photo

Caliper Dust Boot

Dhs. 38.00
Product Detail
Product Detail
x

Caliper Service Parts · High-Temperature Silicone · TTSPORT Street-Performance Calipers

High-Temperature Silicone Caliper Dust Boots

TTSPORT High-Temperature Silicone Caliper Dust Boots are service parts that replace worn, hardened, torn, or missing piston boots on compatible TTSPORT street-performance calipers. Fresh boots help keep brake dust, moisture, road grime, and salt away from the piston bore area so piston travel stays smooth and seals last longer.

Why Replace Dust Boots

  • Blocks contamination from reaching the piston and seal area
  • Helps maintain consistent piston movement during apply and release
  • Inexpensive insurance against a full caliper rebuild
  • Recommended when boots are torn, hardened, missing, or damaged during caliper service
  • Inspect during pad changes on high-mileage calipers, especially if the vehicle sees heat, dust, salt, or wet road conditions

Product Highlights

Material

High-temperature silicone formulated to resist heat cycling around performance calipers.

Function

Flexes with normal piston travel while helping seal the piston bore area against dust and moisture.

Application

Service replacement for compatible TTSPORT street-performance calipers.

Sold As

Caliper service hardware. Verify quantity needed based on piston count per caliper.

Specifications

Caliper Dust Boot
Product Type Caliper piston dust boot / service part
Material High-temperature silicone
Function Helps protect piston bore area from brake dust, moisture, road grime, and salt
Application Compatible TTSPORT street-performance calipers
Quantity Required One boot per piston; total quantity depends on piston count and number of calipers being serviced
Fitment Requirement Confirm caliper series and piston diameter before ordering

This product page describes caliper dust boots only. Calipers, pistons, piston seals, brake pads, brake rotors, brake hoses, brake fluid, brackets, rotor hats, and installation hardware are not included unless separately specified on the final order.

Installation Notes

  • Inspect the piston surface and seal groove before reassembly. Replace pistons or seals if pitted, scored, corroded, or damaged.
  • Clean the boot groove in the caliper body so the new boot seats fully.
  • Use only brake-system-safe assembly lube where required by the caliper service procedure. Avoid petroleum greases that can swell rubber components.
  • Do not stretch, pinch, twist, or cut the boot during piston installation.
  • Bleed the system and confirm pedal feel, leak-free operation, and even pad retraction before driving.

Safety: Brake service must be performed by a qualified technician. Confirm the correct boot for your caliper series and piston diameter before installation.

Compatibility

These boots fit compatible TTSPORT street-performance calipers only. Caliper series, piston count, and piston diameter all affect boot selection. If you are unsure which boot you need, send us your caliper photos and we will confirm before you order.

When to Replace

  • Replace if the boot is torn, hardened, missing, burned, or no longer seated in the caliper body.
  • Replace if contamination has entered the piston bore area.
  • Inspect piston seals if there is fluid seepage around the piston area.
  • Replace boots during a caliper rebuild when pistons are removed for cleaning or seal inspection.
  • Confirm piston diameter before ordering because one caliper series may use multiple piston sizes.

Frequently Asked Questions

Will these fit any brake caliper?

No. They are service parts for compatible TTSPORT street-performance calipers. Verify your caliper series and piston diameter before ordering.

When should I replace dust boots?

Replace them any time a boot is torn, hardened, missing, burned, no longer seated correctly, or when contamination has reached the piston bore area. They should also be inspected during caliper rebuilds and high-mileage brake service.

How many boots do I need?

One boot is required per piston. Count the pistons in your caliper and multiply by the number of calipers being serviced.

What lube should I use during installation?

Use only brake-system-safe assembly lube where required by the caliper service procedure. Do not use petroleum-based grease because it can damage rubber brake components.

Can I install these myself?

Caliper service should be performed by a qualified technician. Proper cleaning, seal inspection, piston inspection, boot seating, brake bleeding, and leak checks are required before the vehicle returns to service.

Need help confirming boot fitment?

Send your caliper model, piston diameter, piston count, and clear caliper photos. TTSPORT will help confirm the correct dust boot before you order.

Contact us to confirm fitment
Care Guide
Care Guide
x

You May Also Like

Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)
Example product title
Dhs. 38.00 AED
Dhs. 38.00 AED
(-0%)

Recently Viewed Products