Skip to content

Email: sales@ttsport-racing.com

Mazda 3 (Axela) Big Brake Kit Upgrade / TTSPORT Classic 5410

by LinLynn 16 Jul 2026

This Changan-built Mazda 3 (Axela) came from the factory with a single-piston floating caliper up front — the kind of setup that works fine in daily traffic but goes soft and vague the moment you push the car. The owner wasn't happy with the mushy pedal feel, so the fix was a TTSPORT 5410 forged four-piston caliper kit paired with a 355x32mm drilled rotor and stainless lines.

Mazda 3 Axela front wheel with TTSPORT 5410 four-piston big brake kit installed

Mazda's driving character has always leaned sportier than its rivals, and this Axela's owner wanted the brakes to match. The car runs 18-inch wheels, and the stock single-piston caliper simply couldn't deliver the bite or feedback the chassis was capable of using.

Vehicle & Kit Specs

Item Specification
Vehicle Mazda 3 / Axela (Changan Mazda), 18-inch wheels
Front caliper TTSPORT 5410 forged four-piston, symmetrical opposed-piston design
Front rotor TT 355x32mm high-carbon, heat-treated, cross-drilled, black-coated
Pads / lines Ceramic brake pads, stainless steel brake lines

Why It Works

TTSPORT 5410 forged four-piston caliper close-up on Mazda 3 front axle

A forged, symmetrical opposed four-piston caliper clamps the rotor from both sides evenly, unlike a single-piston floating design that pushes the pad through a sliding pin and flexes under hard braking. That extra rigidity is what turns a vague, sinking pedal into one that's linear and predictable — you get more stopping power for the same amount of pedal travel.

  • Forged four-piston caliper replaces the stock single-piston unit for firmer, more linear pedal feel
  • 355x32mm drilled rotor adds mass and surface area for better heat capacity and reduced fade under repeated braking
  • Black heat-treated coating on the rotor guards against rust on the areas the pads don't sweep
  • Ceramic pads keep noise and dust down for a comfortable daily-driver feel while still improving bite

Installation Gallery

FAQ

What wheel size does this Mazda 3 TT5410 kit fit?
This build was installed on the car's factory 18-inch wheels, and the TT5410 caliper is designed to fit under 18-inch and larger wheels.
What's included in the TT5410 kit for the Mazda 3?
The kit consists of the TT5410 forged four-piston caliper, a 355x32mm high-carbon, heat-treated drilled rotor, ceramic brake pads, and stainless steel brake lines.
Why upgrade from the Mazda 3's stock single-piston caliper?
The owner felt the stock single-piston caliper produced a soft, spongy pedal. The forged four-piston TT5410 caliper was installed to give a firmer, more linear pedal feel.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger