Skip to content

Email: sales@ttsport-racing.com

Lynk & Co 05 Big Brake Kit Upgrade / TTSPORT Classic 8703S

by LinLynn 16 Jul 2026

The Lynk & Co 05 pairs a sharp coupe-SUV shape with Borg Warner's fifth-generation intelligent AWD system — a setup that can shift torque distribution in as little as 100 milliseconds, hit 0-62 mph in roughly 6-7 seconds, and put 90% of its peak 350 Nm torque down within 2 seconds. That's a lot of grip and acceleration for a stock single-piston front caliper to keep in check. This case swaps in TTSPORT's Racing Series TT8703S six-piston big brake kit to give the brakes the same confidence the drivetrain already has.

Lynk & Co 05 front wheel with TTSPORT TT8703S six-piston big brake kit installed

The stock single-piston caliper on the 05 doesn't leave much margin once the AWD system is putting power down hard and repeatedly. The owner opted for a full front-axle upgrade rather than just a pad or fluid swap.

Vehicle & Kit Specs

Item Specification
Vehicle Lynk & Co 05, factory 20-inch wheels
Front caliper TTSPORT TT8703S monobloc cast six-piston caliper, red finish, stainless racing pistons
Front rotor TTSPORT 380mm x 34mm high-carbon heat-treated curved rotor
Bracket Vehicle-specific caliper mounting bracket
Lines TTSPORT stainless steel braided brake lines
Hardware 25mm wheel flange adapter for clearance behind the factory 20-inch wheels
TTSPORT TT8703S monobloc six-piston caliper in red finish for Lynk & Co 05

The TT8703S is a one-piece cast body with six stainless racing pistons — no dust boots, just the exposed piston bores you'd expect on a caliper built for repeated hard stops rather than daily fade avoidance alone.

Why It Works

  • A monobloc cast caliper body flexes less under load than a stock single-piston floating caliper, which translates directly into a firmer, more consistent pedal.
  • The 380mm x 34mm rotor adds mass and surface area over the factory disc, giving the system more thermal capacity to absorb heat from repeated hard braking without fading.
  • Stainless steel lines replace the factory rubber hoses, cutting down on hose expansion under pressure for a more direct pedal feel.
  • Installed with the vehicle-specific bracket and a 25mm flange adapter, the kit clears the factory 20-inch wheels with a clean, full fit.

Installation Gallery

FAQ

What vehicle is this TT8703S kit installed on?
This build is a Lynk & Co 05 running its factory 20-inch wheels.
What's included in the TTSPORT kit used here?
The kit consists of TTSPORT TT8703S monobloc cast six-piston front calipers, 380mm x 34mm high-carbon heat-treated rotors, a vehicle-specific caliper bracket, and TTSPORT stainless steel brake lines.
Do the bigger calipers clear the stock wheels?
Yes. Per the install, the kit fits behind the factory 20-inch wheels using a 25mm flange adapter, with good compatibility and a clean fit.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger