Skip to content

Email: sales@ttsport-racing.com

Honda Civic (10th Gen) Big Brake Kit Upgrade / TTSPORT Classic 8703

by LinLynn 16 Jul 2026

The 10th-gen Honda Civic built its reputation as a hot-hatch-adjacent sedan on the strength of its 1.5T engine and eager chassis, but the factory brakes were never sized for spirited driving. This car's owner swapped in a TTSPORT TT8703 six-piston big brake kit to match the pedal to the performance the car already had.

10th-gen Honda Civic with TTSPORT TT8703 six-piston big brake kit installed behind an 18-inch wheel

China's domestic-market Civic comes with a choice of 1.0T or 1.5T turbo engines, the 1.5T making 177 PS and 220 Nm through a 6-speed manual or CVT. That's enough performance potential that plenty of owners push the car hard, on street and track alike — and the stock brake package quickly runs out of margin when they do.

Vehicle & Kit Specs

Item Specification
Vehicle 10th-generation Honda Civic (China market, 1.0T/1.5T), 18-inch wheels
Front caliper TTSPORT TT8703 cast six-piston caliper, staggered piston sizing, steel pistons
Front rotor TT 355x32mm high-carbon heat-treated drilled rotor
Lines TTSPORT stainless steel brake lines

Why It Works

  • The TT8703 caliper is cast as a single piece, which cuts down on the self-flexing that a bolted-together caliper body can suffer under hard clamping loads — that rigidity is what keeps pedal travel consistent lap after lap.
  • Different piston sizes across the caliper bore even out clamping pressure on the pad surface, giving a more linear pedal feel and helping the pad wear evenly instead of tapering off on one edge.
  • Steel pistons hold up to sustained heat better than lighter alternatives, which matters once the pads and fluid start working hard.
  • The 355x32mm drilled rotor adds rotor mass and surface area over the stock disc, giving the system more thermal capacity to shed heat and resist fade during repeated stops.
TTSPORT TT8703 forged six-piston caliper mounted on Honda Civic front hub before wheel installation

The owner reported that after the swap, the brakes felt more responsive with a noticeably shorter stopping distance — a meaningful improvement for daily driving confidence, not just track days.

Installation Gallery

FAQ

What does the TT8703 kit include for the 10th-gen Civic?
The kit installed on this Civic includes the TT8703 cast six-piston front caliper, a 355x32mm high-carbon heat-treated drilled rotor, and TTSPORT stainless steel brake lines.
What wheel size does this Civic run with the TT8703 kit installed?
This build runs 18-inch wheels, which clear the TT8703 caliper and 355mm rotor as shown in the installation photos.
Why does the TT8703 caliper use different-size pistons on each side?
The TT8703 caliper uses a staggered piston layout (different sizes across the caliper) to apply more even clamping pressure on the pad, which promotes a more linear pedal feel and more uniform pad wear. The pistons are steel for heat resistance under sustained hard braking.

Need fitment confirmation? Choose the closest TTSPORT series or send your vehicle, wheel size, and intended use before ordering.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
this is just a warning
Login
Shopping cart
0 items
WhatsApp Messenger